1. Thoroughly Clean Surface Decal will be applied to and let dry.
   
   
2. Place the decal in the position you want it, possibly exposing some of the application tape and securing it in place
   
   
3. Slowly Peel off the backing paper then so the decal is on the application tape.
   
   
4. Slowly lay down and smooth on the decal with the application tape still on top of the decal, sticking both application tape and decal on the surface.
   
   
5. Over top the decal and tape, Apply pressure and smooth decal Decal down firmly with a credit card or application squeegee. The more pressure, the better the decal will stay.
   
   
6. Once secured, very slowly peel back the application tape off of the decal. Make certain decal is sticking firmly to applied surface.

** If you have any air bubbles pop with a small x-acto blad and smooth down vinyl.